|
Grizzly G0452 6" Jointer | 
| Brand: Grizzly
Category: Home Improvement
List Price: $435.00
Buy New: $395.00 (On sale from $425.00)
as of 7/29/2010 12:27 PDT details
You Save: $30.00 (7%)
New (1) Used (1) from $300.00
Seller: Grizzly
Rating:  7 reviews
Sales Rank: 56468
Media: Misc.
Shipping Weight (lbs): 270
Dimensions (in): 46 x 27.5 x 37.5
MPN: G0452
UPC: 690550004520
EAN: 0690550004520
ASIN: B0017IH0V6
Availability: Usually ships in 1-2 business days
| |
| Accessories:
|
| Similar Items:
| |
| Editorial Reviews:
Product Description
The latest addition to our family of jointers has some of the most remarkable features found anywhere. Starting from the ground up: built-in "kick-stand" mobile base (just push the lever down, push the machine where you want it & kick the lever back up!), built-in dust chute with 4" dust collection hood, quick adjusting lever on the infeed table, fine control handwheel on the outfeed table, positive stop at 1/8" on the infeed table, large 5" x 35" cast iron fence, rack & pinion fence adjustment, & an easy access switch with a removable safety key. Specifications: Motor: 1 HP, 110V, single-phase Maximum stock width: 6" Maximum depth of cut: 1/8" Maximum rabbeting capacity: 1/2" Cutterhead diameter: 2 1/2" Number of knives: 3 Cutterhead speed: 4800 RPM Table size: 6" x 46" Table height from floor: 32 1/2" Cuts per minute: 14, 400 Fence size: 5"H x 35"L Fence adjustment: positive stops @ +/- 45° & 90° Overall dimensions: 46"L x 27-1/2"W x 37-1/4"H Approximate shipping weight: 270 lbs. Free pair of safety blocks
|
| Customer Reviews:
Showing reviews 1-5 of 7
 Good value, good jointer. August 3, 2008
R. Rater (Texas, USA)
12 out of 12 found this review helpful
I have had the jointer for a few days now and am very pleased with it. I just ran about 60 board feet of walnut through it today and I'm happy with the results.
Heavy duty, and just plain heavy. Listen to them when they suggest that you have a friend help you put it together.
The reason I chose this jointer over the competition is that the quality is very high for the cost. I'm sure it's not what a furniture building shop running every day would want, but for me (hobby use), it is definitely a big step up from the Delta Shopmaster benchtop jointer.
Also, if you compare this against the jointers I see as competing against it, this is the only one with a mobile base built in. That's a pretty big chunk of money if you had to go out and buy one.
The competition: Delta (floor shopmaster model; cheesy construction, too expensive, no mobile base), Jet (doesn't matter what model #, they're all too expensive), Sunhill (I don't know anything about this brand, but the cost was higher so I didn't even evaluate this one), Craftsman (21705; more expensive for probably the same quality), Ridgid (JP0610; closest competitor in my book, good reviews around the 'net, same cost since I paid for shipping on the Griz, would pay for tax on this one, but no mobile base and no fully enclosed stand). Anyways, I think the Grizzly machine stacks up well quality-wise with all of those. It definitely has handled the load I put on it today with good quality cut and a nice finish.
Update:
I have now had this jointer for a few months and hold the same opinion. I've run at least 400 bf through it, probably more. Same blades... still sharp. I've even advised a coworker of mine who has a woodworking hobby to buy the same model. One thought, though, for those of you with extra money:
* I'm sure my technique isn't perfect, but this machine puts very, very small ridges in the wood as you run it through. The ridges are caused by the blades and you can reduce them by slowing down the feed rate. Not a big deal because they plane away (I usually run everything through my planer because it gives a really nice surface), but still... I didn't expect it on a three blade machine. I'll bet the spiral cutterhead version of this machine wouldn't have that problem. So... someday I'm going to upgrade to the spiral cutterhead, but if I had splurged for it at the beginning I would have had more power as well (I believe the spiral cutterhead 6" Grizzly has a more powerful motor).
Don't let this dissuade you... I think it still stacks up well against the competition and edges everything, unless you find a great sale on the Ridgid.
Great Value, Great Customer Service October 22, 2008
R. CASSIDY (test)
4 out of 4 found this review helpful
I've had this Joiner for about a week now and have run a good bit of stock through it. I've found it to be more than powerful, straight, easy to setup and VERY easy to move around with the wheels. This will get used very much in my shop. The only draw back was just all the grease on the surfaces for shipping. It was completely excessive and took a while to clean up but that's a minimal grip at best.
Awesome product, not fun to clean at first though. December 30, 2008
Dustin G. Haugh (Pocatello, ID)
2 out of 2 found this review helpful
I own a small cabinet shop and this jointer is more than adequate for the job. Even with 1hp it does just fine. Grizzly is the way to go. I just need to hear from someone about their shapers. I can't find any recent reviews for them.
Great jointer! April 14, 2009
D. Beck (Augusta, GA)
2 out of 2 found this review helpful
This is the first jointer I've ever owned. It's probably a bit heavy-duty for a first-time jointer, but I'm really glad I went with it. It's about 300lbs overall so it comes via freight, but that process was really easy. Setup after I got home was pretty easy too. I've only been able to run a couple boards through, mainly for setup, but the cuts were perfect and extremely smooth. This has turned out to be a much better buy than I even expected it to be. The built-in mobile base is also an excellent feature. It makes it extremely easy to move around the shop.
Is it good for you? June 4, 2010
Carlgo (Carmel Valley, CA)
I bought my GO452 years ago. After my usual over-analyzing it seemed to be the best jointer for my use and budget. It is considerably less expensive than what appear to be similar machines.
I have to use mobile bases in my workspace and they ain't cheap, so it was a big bonus that one was included. It works well and doesn't add any instability. Great feature.
The controls mounted high on the extension is an important feature, easier and safer than ducking your head down try to locate switches under the bed. I suggest that you should look for this feature on any jointer you get.
Now, is a 6" jointer big enough for you? I have made tons of furniture with this machine as part of the process, dining room tables, big beds, cabinets of various sorts, desks, side tables, dressers, all sorts of stuff.
What about not being able to use 8" lumber? What I found is that I ended up with 6" boards most of the time anyway. It is easier to work with, cups less than wide boards and it is easier to find flawless narrower boards in the first place. My work is mostly maple with a clear finish, and I like the look, don't feel limited by it.
If you are going to be making 12' mahogany entrance doors out of huge old-growth planks, you had better tool up accordingly.
Of course, it doesn't matter how wide the boards are if you are just jointing the edges for a nice glue joint.
Can't you just get a good blade and carefully rip the edge on a table saw? Yes, but I find that jointers do it better and more easily. Heck, you can get perfect joints with just a long jointing hand plane. It was done perfectly for hundreds and thousands of years that way. I'll bet those woodworkers could do it fast as well as perfectly, but that isn't a style for everyone, especially if you can afford a modern machine.
The motor has never bogged down or become a limitation. I make a lot of shallow passes rather than trying to be brutal and slam out a board in one pass, and I think that is the best way to work anyway. Everything is adjustable and while perfect set-ups are a bit of a chore on almost any machine, the GO452 can be set up just right.
The bed is flat. My fairly good straight edge shows it to not have any noticeable twists or high spots. I did not try to use dial gauges or anything too trick. Big iron castings can warp and actually can do so after a period of time, especially if the machining is done too soon after the casting process. Mine is years old and is still good, so hopefully they all are.
I confess to putting some pretty rough stuff through the jointer, not exactly the knotless kiln-dried stuff TV woodworkers use, but the original blades lasted a long time and are good quality.
You can get carbide blades and if you do a lot of rough and knotty wood, that would make sense. Grizzly also markets a quick-change blade system. In a high-volume shop that would save a lot of time. There are also expensive spiral cutting assemblies that use interchangeable carbide inserts. If you are working at that level, I would probably suggest a bigger, more expensive commercial jointer anyway.
It comes with a device to help you set the blades. It works fine, but you have to be patient, measure twice, get it all done and check your work. It is the nature of machines in this price range at least.
It is easy to maintain. The motor and belt are accessible and the various adjusting bolts and stops are also straightforward and easy to work with. Mine has been totally reliable. Nothing has worked loose or broken. I like the paint scheme. That is unimportant, but at least someone with good taste selected the colors. I wouldn't buy a tool with a cartoon paint job, probably...
My work got better when I got this machine and I recommend it for any normal woodworking project. Obviously, huge commercial machines are better. Doh! One of the TV woodworking guys suggested 12" models, like his! Well, I could suggest buying an Aston Martin instead of a Ford Fiesta! It is also clearly a better machine, but...!
Five stars because I really don't think it could be much better for the very reasonable price. It would be nicer if it was heavier and the beds were longer, but then it would be big and expensive and the UPS man wouldn't deliver it (It does come in two cartons and you have to assemble it. It was easy to do).
Showing reviews 1-5 of 7
|
|
|
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME. Copywrite 2009 1CoolTool.com | |
