Senco PC0947/FP18KIT 18-Gauge Brad Nailer Compressor Combo Kit

The PC0947 Finishing Combo Kit At a Glance: Kit contains everything you need for finishing jobs FinishPro 18 Nailer drives 18-gauge brad nails from 5/8" to 2" PC1010--a lightweight, oil-less compressor with one-gallon capacity tank All necessary air fittings included Both tools back by one-year warranty

The PC0947 has all the features you need for your finish jobs. View larger.

Thanks to the rugged, compact compressor, you'll get professional quality on the go. View larger.

Designed to be user-friendly, this nailer features an adjustable depth-of-drive and exhaust, as well as a belt hook that lets you take the tool everywhere you go. The soft grip provides comfort and control, a no-mar pad protects the work surface, and a rear bumper protects work finish.

Rugged and Compact Compressor
Powered by a 1.0 HP (peak), 0.5 HP (running) oil-less motor, the PC1010 compressor has a one-gallon capacity tank. It provides 4.0 amps at 115 volts and 120 psi max output. The 1/4-inch quick disconnect coupler and regulator provides consistent, reliable operation, while individual gauges for tank and regulated output allow you to easily keep track of pressure. And because the PC1010 is electric, you won't have to worry about the expense and mess of oil.

Designed to be rugged enough for professional use, the PC1010 is lightweight at 20 pounds, and it features a cushioned handle for easy carrying and a compact, easy-store design. And to save you time, it pumps up in just over two minutes and recovers in only 35 seconds.

Both tools are backed by one-year warranty.

About Senco: Innovation Backed by Experience
For over 50 years, Senco has been setting quality and performance standards for the fastener industry. In fact, Senco was the true inventor of the pneumatic fastening industry way back in 1950, and they've been the leading innovator in fastener technologies ever since. As a company, Senco has achieved an unheard of ten thousand hours of fastener engineering expertise.

In just one year, their plant in Cincinnati alone uses enough wire to make 18 trips to the moon and back. Even more impressive is the fact that since 1996, Senco has sold over 500 trillion fasteners to trusted companies like Fleetwood, Champion, Merillat, Ashley Furniture, and other major manufacturers.

What's in the Box
FinishPro 18 Brad Nailer; PC1010 one-gallon electric oil-less compressor; 1/4-inch x 25-foot coil hose; tool oil; all necessary air fittings; safety glasses; manuals; and variety pack of 18-gauge brad nails.

THE BRAD NAILER:
The gun is lightweight and small enough to get into tight spots, yet it appears to be very well built. The protective no-mar pad does not scratch prefinished moulding, and the side load magazine is convenient and easy to use. I shot about 200 2" brads while installing new 1/2" baseboards and 3/4" birch door trim in my bedroom. Every brad was countersunk to perfect depth, and I did not get a single jam. I ended up with very professional results and finished in 1/2 the time it would have taken me with the old hammer and finish nails.

THE COMPRESSOR:
The PC1010 will change the industry. For homeowners, hobby woodworkers, and customer service professionals in the cabinetry industry this is the perfect compressor. There is no need to lug around a 4 or 6 gallon compressor for a little brad nailer. You can easily carry the nailer, hose, and bread box sized compressor in one hand. From startup, this quiet, lightweight little workhorse takes about 2 minutes to pump up to 110 psi. I consistently got 10 shots before kick in, then another 40 seconds or so to recover. I nailed right through the recovery time, and never had to wait for the compressor to before driving any brads.

SHORTFALLS:
It is very difficult for me to find anything that I don't like about this one. However, rumor has it that Senco guns work best with Senco brads, and the local home improvement stores sell mostly PC and Bostich... so I will need to find another source. I would not recommend the PC1010 for anyone who wants to drive anything larger than 18ga brads, or run multiple air tools from a single compressor. Also - the compressor is so new that Senco has very limited literature on it, but I would be willing to bet they will get this taken care of soon.

CUSTOMER SERVICE:
Some of the best customer service I have had the pleasure to work with. If you purchased from an authorized dealer, and you have any problems with your equipment, I recommend calling Senco directly.


Woodworker Hobby or Trim Tool   June 23, 2004
F Baker (Laurel, MD United States)
20 out of 20 found this review helpful

I got this package for very light duty use - woodworking shop projects and qtr-round molding on flooring. The nailer is a quality tool that sells for $120 everywhere so that makes the compressor only $75. I had a $15 coupon so the compressor was only $60 for me.
The compressor is so light that it is no problem carrying it. The tank pressure is 125 lbs and I set the tank outlet pressure to 90 lbs. It shoots about 10 brads before it cycles but you can keep shooting as it runs. I used 5/8" brads on molding on a shop project and 2" brads on floor qtr-round without a single problem. This sure saves time and doesn't mar the wood. It is pretty quiet and also looks good. Getting to small jobs and using this little tool is a pleasure. I will get an air blower tip for it; so far I'm satisfied.


I'm impressed.   August 10, 2003
A. Conneen (St. Petersburg, Florida United States)
21 out of 22 found this review helpful

I upgraded to this from a cheap little electric brad nailer that could not sink a 1" brad. This tool is light and has plenty of power. The compressor is small & quiet and has absolutely no problem keeping up with the nailer. I own an old 5 horse 220 v compressor but wanted something to use inside the house without running hundreds of feet of hose from the garage. This will fill my needs perfectly.
P.S. I shop online alot and would like to say that Amazon.com has the best customer service of any company I have dealt with.


This contractor is very pleased... with the compressor   August 20, 2004
herbert vierra (Monrovia, CA)
20 out of 21 found this review helpful

I own several portable compressors, but hate to lug them around. So, I bought this one for installations of wood mantels and little odd and ends work (like attaching a piece of trim after the rest of the job is already done). The little compressor is lightweight and perfect for small jobs like these. On bigger jobs I still use one of my heavy duty compressors. So, that may be the problem some of the other reviewers are having. It's just not built for heavy duty work.

The gun on the other had was a disappointment. I already had a Senco XP 25 and prefer it. Still, it's a pretty good price for both pieces, so, no real complaints here. I've just set the newer one aside, for now.

Regarding the cheap 1/4 inch hose... pleeeease. Anyone with half a brain knows it's a cheap piece of krap, but will work fine for the occasional hobbiest. If you want a good hose, buy one.