Cabinetmaker
A good all purpose feeder. I use mine mostly on a table saw W/dado blade rabbeting melamine panels so I cut 90degree grooves on rubber wheels to assist in traction on dusty melamine and it works good. Plenty of horsepower and stays in position. Would probably buy next size up W/4 rollers if I was cutting panel larger than 24x48 regularly.

No complaints
There are enough useful reviews here for you to make a decision. The only thing I have to add is my actual usage of the machine.

I use this feeder on a Grizzly 1.5 HP shaper. I use a 3 wing cutter that cuts a .75 diameter half circle. I have the feeder set to the slowest feed speed (cant remember fpm) and it seems to be matched perfectly for that cut in cherry.

In other words, I think this feeder is a good match for a smaller shaper with a moderate cutter.

I would buy this feeder again, despite the fact that I have pretty much given up on Delta tools in general.

Great to be safe
Got this and set up easy. I have a 3hp Grizzly table saw. This makes me feel much safer. I keep my hands away from blade and the machine takes abuse. I have broken my finger using this saw in past with this item you will feel many times safer.

Better than the price would indicate
Easy to set up on shaper and well designed. Have run 100'x of Board Ft without and clitches.

Running 7/8 hardwoods without any problems what-so-ever.

Good for occasional use.
I work in the woodworking industry and this would not cut it. It has performed well in my home shop though. My only complaint would be that it doesn't have enough torque. If you have to much downward pressure on your workpiece and you stop the feeder it may not start again without you pushing it. Good feed speeds and easy setup/installation.