Accessories

Pretty good, but not perfect
One big warning: don't cut stainless. Even with the stainless blade: DeWalt DW7749 14-Inch 90 Tooth Stainless Steel Cutting Saw Blade with 1-Inch Arbor It blew up on me after about 50 beautiful cuts on 1-1/2" 16 gauge square tube; fairly light stuff. Then about 20 teeth were missing or chipped in short order. Thankfully, the Amazon guarantee made it worth trying out for no risk except for the wasted time.

But overall, it's a pretty nice cheap alternative to a cold saw. It's also faster than a cold saw or even an abrasive chop saw. Yes, it costs more to operate, but resharpening in Minneapolis (Eide Saw) is less than $20. The resharpened blades don't cut quite as clean, but they last as long or better. It's worth it for the speed and for spending a lot less time cleaning up the burrs left by a chop saw. There's also a heck of a lot less dust in my shop and on me now.

I agree that the vise is cheesy, but if you deduct the value of the included blade, the saw costs less than $300.

And one more thing. As a friend told me, if you want to clear out the shop in a hurry, just fire up this saw. People will find another place to hang out as soon as they hear that DeWalt start wailing.

Couldn't be any more pleased!
I have been using this saw for approx 2 years in a farm shop. I cut everything from alluminum to hard steel. I have even cut 3 inch heavy wall tubing with this saw and still on the original blade and that is after making all the cuts for 280 foot of pipe fence just recently built. There is no burrs and the cuts are cool enough to handle after you make them. The best part is you don't loose any of your cutting diameter after several cuts like with the abrasive blades. I normally went thru 6-8 abrasive blades a year and at 10.00 a pop it more than covers the cost of replacement of the carbide.

I couldn't be more pleased with the saw and would buy another whenever required.

Great if your patient
Cuts great, if you take proper care to go slow. If you're used to a using an abrasive type wheel you will be tempted to push too hard and ruin the blade. The cut finish is excellent.

Good saw, but use carefully
I bought this saw for a small, part time welding business. It immediately started to pay back. The first project I used it on, my brother made almost 300 cuts in one day, on one blade, cutting 2" square tubing, 3/16" wall thickness. If we had been using abrasive blades, he would have had to stop to replace the blade at least 5 times, probably more.

However, as mentioned, the base is light, and we found that the threaded rod on the clamp mechanism was soft, and wore out easily. We did build extensions, to support the metal at level, and also a stop, to be able to cut many pieces to length, without repeatedly measuring. I used the saw for a year, had two blades that I would rotate to the sharpening shop. I then sold it to my father-in-law, and they are still using it now, 4 years later. The clamp mechanism is gone, the base is beat up, but they bolted it to a table, and it keeps on going.

Highest precision cutting available
I've been sculpting and working with metal for over a decade (forming, welding and forging) and I own thousands of dollars worth of metal fabrication equipment including commercial duty abrasive cutoff saws and plasma cutters.

The DeWalt DW872 Carbide Cutoff saw is simply amazing. Other reviewers grip about it not being square and the high cost of blades. I've not had that problem. My unit did have a (slight) wobble in the blade but a single call to Dewalt got new blade bushings express mailed to me and that solved the problem.

The unit cuts incredibly smooth and square providing perfect miters, something NO abrasive saw can achieve.

I agree that this tool costs considerably more than an abrasive saw, but if you value your time and are looking for clean precise cuts it will deliver. It is well worth the money!