Accessories

Great saw!
First of all let me say that if you're a lefty and have never used a left-handed saw, you don't know what you're missing....BUY ONE!!!

As for this particular saw, I was VERY pleased with its weight, construction, and ease of use. I used it a moderate amount during its first project and it performed wonderfully. I was pleased with the purchase and would buy it again. It came in a HUGE plastic case that is unnessesary, but could be a tool case for your son or a barbie chest for your daughter. Get the saw, it works great and doesn't cost an arm and a leg. Happy cutting!

Deviates from straight fence guided cuts/rips...
I am not sure if it is just me but out of the box, I found that at best after 3 or so feet into the cut with the help of a fence consisted of a spare sheet material to guide the base alongside, the saw likes to get stuck, deviates from the straight line, and pretty much messes up the perfect straight line cut. the line deviates from 1/8 to no more than 3/16ths from the line.

Material I have used this saw on is 3/4 MDF and plywood. Both have the same results. This is with the stock blade that is included.

It seems the blade gets loose over the course of the cut adding to the way it gets off course. I am starting to readjust my methods and using this saw for a purely sloppy (and slow) cut and using the same sheet fence on the piece, adjusting that for my VERY RELIABLE TRITON ROUTER to finish the edge.

This is probably the first time I truly regret a purchased tool. The official milwalkee edge guide (sold separately) for the saw isn't worth anything in my book. I thought I can't go wrong with the Milwalkee brand.

Great circular saw!
Power, balance, adjustable grip, Smooooth, this is a great saw. I have a Craftsman and Black and Decker but this saw is the best I have used. I did extensive internet research and in 3 different reviews the Milwaukee 6391 was the top rated saw in its class. I have to agree, this is a heck of a saw. With the right blades it cuts 1/2 inch and 3/4 inch ply like butter. Keeps a straight cut and it is easy to see the blade while cutting. Also comes with a nice case with room for a couple of blades. Note: the allen wrench to remove the blade is stored in the saw handle not the case.

Just what I wanted
I already owned the right handed saw just like this one so I knew what to expect for the most part. I like the saw and it feels the same as the right handed milwaukee tilt-lok I bought 7 years ago (used it a lot since then too) as far as quality goes. I had been wanting this saw to be made for years and the other day I saw it online. I always wanted a left and right handed saw of the same brand and model to have on the job. I never cared for any porter cable tools and that is the only lefty saw I ever see anywhere anymore.

I like that it has a five year warranty in case something unexpected went wrong on it.
The case is nice and the wrench is standard but it does not come with a rip guide.
I use the saw both left and right handed depending on what I'm cutting and it is equally comfortable. I like that during right handed use I don't have to lean over to see the blade/ cut line. It does feel a little weird at first but your back will appreciate it if you are like me and your body is starting to age.
Another user said it was not safe for right handed use. I disagree, I have no problem but then again I have a lot of experience with saws and so forth as it is how I make my living- I believe in safety very strongly.
I would reccomend using a dewalt yellow rim blade. I like the 24t for framing and the 40t for finish. The blade that comes in the saw cuts good but throws material in the direction of your face a little too much for me. Dewalt has always made the best normal priced blade in my opinion. I like the Milwaukee saw though. Makita blades are ok too.

I would reccomend this saw to any other pro carpenter. If you build only decks you might want to go worm drive- nothing pulls a saw like wet pressure treated lumber. Don't get me wrong this saw has plenty of power and is plenty tough for all carpentry work on a daily use basis. I could just see someone who is putting it through max wet lumber duty daily could want the hypoid as the overall construction is a little more solid. On the plus this is an extremely powerful saw for it's size.

My old right handed one has helped me finish a lot of jobs. Milwaukee has always built a good product from my experience.

Great saw!
No complaints at all. I love the adjustable handle angle. More than enough power for general carpentry needs. I'm not planning on using it on concrete or anything of that nature, so I can't comment on its performance in that category. The left-hand blade took some getting used to as my old saw was a cheap B&D model. Love it now.