How to Solve Windows Vista Error ‘Error Occurred…boot Configuration Data’?
January 6th, 2010 | 
Author: Windows Vista Boot Configuration Data or BCD is a firmware independent database required by computer to get configuration information at boot time. It has similar functionality that Boot.ini file performs in earlier versions of Windows. On computers using IBM PC compatible firmware, the file is located on system volume in BootBCD. If the file goes missing or cannot be read by computer, you encounter several boot-time issues. In worst case, the system can become completely unbootable, without allowing you to access the stored data. If you fail to solve such issue by using system repair tools, you might need to reinstall Windows Vista that causes data loss. To restore thus lost data, you need to either use your backup or a third-party data recovery utility that can locate and restore the missing data.
To illustrate such scenarios, consider that you use a Windows Vista based computer. You start the computer and come across the below error message:
File: BootBCD
Status: 0xc000000f
Info: “an error occurred while attempting to read the boot configuration data”
You cannot boot the computer after you receive this error message and your data remains inaccessible.
Cause
The above error might occur due to any of the following possibilities:
-
The BootBCD file is missing or damaged
-
No Bootmgr (Windows Boot Manager that accesses BCD store) is present
Solution
To solve the given problem, you need to follow these methods:
-
Use Windows Vista installation disc to start the computer and choose ‘Repair your computer’. You then need to select ‘Startup Repair’ option of ‘System Recovery Options’ to repair the BCD store.
-
Try using Bootrec /RebuildBcd command through command prompt listed in ‘System Recovery Options’ that runs the Bootrec.exe tool to rebuild the store. Type Yes if the tool can locate missing Windows installation and asks you to mark an entry. If it cannot, you need to execute the below commands to remove and then recreate the BCD store:
Bcdedit /export C:BCD_Backup
ren c:
- Advancements
- Artificial Intelligence
- Biotechnology
- Computer Architecture
- Computer Forensics
- Data Recovery
- Databases
- Gadgets & Gizmos
- Hardware
- Intranet
- IT Trainings
- Laptops
- Malware
- Mobile Computing
- Networks
- Office Automation
- Operating System
- Programming
- Research
- Security
- Software
- Support & Services
- Tech Updates
<!–
ch_client = "moazam";
ch_type = "mpu";
ch_width = 160;
ch_height = 600;
ch_color_title = "2337CC";
ch_color_site_link = "2337CC";
ch_non_contextual = 4;
ch_vertical ="premium";
ch_sid = "Chitika Premium";
var ch_queries = new Array( );
var ch_selected=Math.floor((Math.random()*ch_queries.length));
if ( ch_selected
How to Solve Windows Vista Error ‘Error Occurred…boot Configuration Data’?
Published by: Jacobluis (32) | Word Count: 430 | Comments: 0 | Article Views: 325
Contact Author
Email to Friends
Print Article
Make PDF
Bookmark & Share Article
Add a Comment
Report Article
Windows Vista Boot Configuration Data or BCD is a firmware independent database required by computer to get configuration information at boot time. It has similar functionality that Boot.ini file performs in earlier versions of Windows. On computers using IBM PC compatible firmware, the file is located on system volume in BootBCD. If the file goes missing or cannot be read by computer, you encounter several boot-time issues. In worst case, the system can become completely unbootable, without allowing you to access the stored data. If you fail to solve such issue by using system repair tools, you might need to reinstall Windows Vista that causes data loss. To restore thus lost data, you need to either use your backup or a third-party data recovery utility that can locate and restore the missing data.
To illustrate such scenarios, consider that you use a Windows Vista based computer. You start the computer and come across the below error message:
File: BootBCD
Status: 0xc000000f
Info: “an error occurred while attempting to read the boot configuration data”
You cannot boot the computer after you receive this error message and your data remains inaccessible.
Cause
The above error might occur due to any of the following possibilities:
-
The BootBCD file is missing or damaged
-
No Bootmgr (Windows Boot Manager that accesses BCD store) is present
Solution
To solve the given problem, you need to follow these methods:
-
Use Windows Vista installation disc to start the computer and choose ‘Repair your computer’. You then need to select ‘Startup Repair’ option of ‘System Recovery Options’ to repair the BCD store.
-
Try using Bootrec /RebuildBcd command through command prompt listed in ‘System Recovery Options’ that runs the Bootrec.exe tool to rebuild the store. Type Yes if the tool can locate missing Windows installation and asks you to mark an entry. If it cannot, you need to execute the below commands to remove and then recreate the BCD store:
Bcdedit /export C:BCD_Backup
ren c:
Posted in Dewalt Tool Reveiws | 
Tags: Configuration, Data, Error, Occurred...boot, Solve, Vista, Windows | 
No Comments »
How to Solve Windows Vista Error ‘Error Occurred…boot Configuration Data’?
Windows Vista Boot Configuration Data or BCD is a firmware independent database required by computer to get configuration information at boot time. It has similar functionality that Boot.ini file performs in earlier versions of Windows. On computers using IBM PC compatible firmware, the file is located on system volume in BootBCD. If the file goes missing or cannot be read by computer, you encounter several boot-time issues. In worst case, the system can become completely unbootable, without allowing you to access the stored data. If you fail to solve such issue by using system repair tools, you might need to reinstall Windows Vista that causes data loss. To restore thus lost data, you need to either use your backup or a third-party data recovery utility that can locate and restore the missing data.
To illustrate such scenarios, consider that you use a Windows Vista based computer. You start the computer and come across the below error message:
File: BootBCD
Status: 0xc000000f
Info: “an error occurred while attempting to read the boot configuration data”
You cannot boot the computer after you receive this error message and your data remains inaccessible.
Cause
The above error might occur due to any of the following possibilities:
-
The BootBCD file is missing or damaged
-
No Bootmgr (Windows Boot Manager that accesses BCD store) is present
Solution
To solve the given problem, you need to follow these methods:
-
Use Windows Vista installation disc to start the computer and choose ‘Repair your computer’. You then need to select ‘Startup Repair’ option of ‘System Recovery Options’ to repair the BCD store.
-
Try using Bootrec /RebuildBcd command through command prompt listed in ‘System Recovery Options’ that runs the Bootrec.exe tool to rebuild the store. Type Yes if the tool can locate missing Windows installation and asks you to mark an entry. If it cannot, you need to execute the below commands to remove and then recreate the BCD store:
Bcdedit /export C:BCD_Backup
ren c:
- Advancements
- Artificial Intelligence
- Biotechnology
- Computer Architecture
- Computer Forensics
- Data Recovery
- Databases
- Gadgets & Gizmos
- Hardware
- Intranet
- IT Trainings
- Laptops
- Malware
- Mobile Computing
- Networks
- Office Automation
- Operating System
- Programming
- Research
- Security
- Software
- Support & Services
- Tech Updates
<!–
ch_client = "moazam";
ch_type = "mpu";
ch_width = 160;
ch_height = 600;
ch_color_title = "2337CC";
ch_color_site_link = "2337CC";
ch_non_contextual = 4;
ch_vertical ="premium";
ch_sid = "Chitika Premium";
var ch_queries = new Array( );
var ch_selected=Math.floor((Math.random()*ch_queries.length));
if ( ch_selected
How to Solve Windows Vista Error ‘Error Occurred…boot Configuration Data’?
Published by: Jacobluis (32) | Word Count: 430 | Comments: 0 | Article Views: 324
Contact Author Email to Friends Print Article Make PDF Bookmark & Share Article Add a Comment Report Article
Windows Vista Boot Configuration Data or BCD is a firmware independent database required by computer to get configuration information at boot time. It has similar functionality that Boot.ini file performs in earlier versions of Windows. On computers using IBM PC compatible firmware, the file is located on system volume in BootBCD. If the file goes missing or cannot be read by computer, you encounter several boot-time issues. In worst case, the system can become completely unbootable, without allowing you to access the stored data. If you fail to solve such issue by using system repair tools, you might need to reinstall Windows Vista that causes data loss. To restore thus lost data, you need to either use your backup or a third-party data recovery utility that can locate and restore the missing data.
To illustrate such scenarios, consider that you use a Windows Vista based computer. You start the computer and come across the below error message:
File: BootBCD
Status: 0xc000000f
Info: “an error occurred while attempting to read the boot configuration data”
You cannot boot the computer after you receive this error message and your data remains inaccessible.
Cause
The above error might occur due to any of the following possibilities:
-
The BootBCD file is missing or damaged
-
No Bootmgr (Windows Boot Manager that accesses BCD store) is present
Solution
To solve the given problem, you need to follow these methods:
-
Use Windows Vista installation disc to start the computer and choose ‘Repair your computer’. You then need to select ‘Startup Repair’ option of ‘System Recovery Options’ to repair the BCD store.
-
Try using Bootrec /RebuildBcd command through command prompt listed in ‘System Recovery Options’ that runs the Bootrec.exe tool to rebuild the store. Type Yes if the tool can locate missing Windows installation and asks you to mark an entry. If it cannot, you need to execute the below commands to remove and then recreate the BCD store:
Bcdedit /export C:BCD_Backup
ren c:
Posted in Dewalt Tool Reveiws |
Tags: Configuration, Data, Error, Occurred...boot, Solve, Vista, Windows |
No Comments »
Acne No More Review and Testimonial, Does It Really Work?
Recently, we have heard a lot of buzz about a new product called Acne No More. Because of all of the excitement, we decided to try it out to see if it lives up to the promises it makes. That way, our readers can get all of the information they need before they purchase the product. Overview Acne No More is a holistic acne treatment created by Mike Walden. Walden is a Certified Nutrition Specialist, Health Consultant, Medical Researcher, and author that suffered from acne for years before coming up with Acne No More.
Walden claims the product eliminates acne within two months. Users are given a step by step program to follow that is supposed to cure acne and keep the user from suffering future breakouts. Our Experience With Acne No More One of the first things we noticed about the program is that it is holistic. We liked the fact that the treatment works on the entire body instead of only the face. We have heard that acne is an issue that is caused by the entire body, so the fact that the treatment is holistic gave us confidence. We also felt a great deal of confidence because the skin care secrets in Acne No More were built after a seven year study.
The information from the study was analyzed and then the seven secrets were compiled. Ease of use is something else that is important to us, which is another positive aspect of the program. Acne No More came with a step by step guide and instructional videos. We are not medical professionals, but we followed the program without a problem because the guide and videos explained everything so well. Also, Acne No More was designed to work for all types of acne. Our symptoms ranged from mild to severe, and we were all able to use the product and get results.
The program worked to create a hormonal balance instead of just temporarily clearing our skin. As we became more balanced, we noticed our skin cleared up quickly. As our hormones balanced, our skin also stopped being oily. It became the perfect balance and our complexions looked so much better. The system also helped us realize how we were contributing to our acne. When we learned about the ten foods that cause acne, we were shocked. We ate them all on a regular basis, and by stopping, we got quick results. Not only that, but we were able to learn about the ten foods we should be eating.
We were even able to find our acne trigger. We did not realize each person has a trigger, and when we found that out, we were able to start working to get rid of acne. One of the most shocking benefits of Acne No More was the way it removed the acne scars we already had. We have dealt with acne for years and thus, had a great deal of scarring. After a couple of months on the program, the scarring was gone. We also liked the fast results. After just two weeks on the program, our acne was already disappearing. Then, by the time we had been on the program for two months, we were completely acne free. We did not think that was possible. In addition, we have not had to deal with acne since then.
The Bottom Line After our experience with Acne No More, we feel confident in its abilities to not only treat acne, but to eliminate it for the long term. In two months, our skin was clear and we have not had an outbreak since. People should try Acne No More if they are sick of dealing with acne and want a clear complexion. We highly recommend the product for anyone suffering from acne.
Posted in Milwaukee Tool Reviews |
Tags: Acne, More, Really, Review, Testimonial, Work |
No Comments »
The Art of Promoting Your Website
Promoting has been a tool which has been around for a long time and today. As technology and the use of the internet increases, business ventures must also be up to date with tactics. So just how do you promote yourself and your business?
There are a number of web options available for web promotion. There are also SEO tools that can help you get your internet business on the map. Here are five simple ways in which you can market your web page.
Building your web site- When you are creating your web page, you must design it in such a way, that it is easy to use and is a website people will like to visit. If this is the scenario, people will get the word around and refer your site to their friends. If you keep your page functionally, you can actually reach millions of people across the world. Make sure that you use your SEO tools so people from all over have the opportunity to get to your website and obtain valuable information from it.
Get an email address- As simple as this may seem, it is a vital step. There are a lot of people who do all of their communicating for business purposes though the internet. You need to have a professional address which portrays yourself as a trustworthy business person. It would be an added bonus if you have an email address with your business’s name in it; this will reinforce it in the minds of your customers.
Community Networking- Social networking sites are probably the most important of the SEO tools that you are going to use. These social sites are the perfect place for you to optimize your website. Small businesses especially, should make the best out of this tool.
Take and use ample time to find a group or a website, which is in your particular niche and get yourself involved. Join forums and chat rooms because these will get your name out there. Once you have become known as the expert, people will trust you and will be willing to try out your services.
Be seen- If you want to get attention, do something that is not expected. Use your SEO tools to create something that is out of the ordinary. For example, you could make a video or create a character and involve it in a story, to somehow get people to keep coming back.
Maintain your presence- This is important to do since the web changes daily. Once you get your site up and running, you have to keep checking and make sure that your site has fresh content. With your SEO tools, this should be simple; so do not get lazy. If you are not savvy with using the web, then it might be in your favor to hire someone who will keep it up- to- date for you.
If you use these five marketing techniques and your SEO tools, you should be on your way to having a successful internet business in no time.
Buy Quality Teeth Whitening Products Online
The dental hygiene is must to be taken care of to avoid any kind of dental decay that may affect the over all health of the people. Tooth whitening is considered to be an effective way for fighting against the abuse of foods and tobacco for maintaining the health of teeth in a proper manner.
The process of teeth whitening helps in removal of the food particles and to avoid the problem of stains which may affects the look of teeth. Teeth whitening help in keeping the teeth white and healthy.
The process of teeth whitening is considered to be the easy and fast modernize way of improving the color of teeth under the supervision of whitening agents. You can also use several teeth whitening products available for the purpose of teeth whitening while sitting at home.
While using new and different techniques always take proper care before using any kind of teeth products to avoid any harmful affects. Home teeth whitening are totally time- consuming process that can easily improve the look of the teeth in hassle free manner.
Another amazing way of making teeth whitening system successful are teeth bleaching products that makes white teeth in few minutes and gives the person perfect dazzling smile. According to consumer organizations and health professionals advised should be use teeth bleaching products only after consulting the dentist to avoid any side affects that may affect on your teeth.
Teeth whitening treatment become easier and inexpensive due to the availability of various products of teeth whitening. With the commencement of new techniques and several types of brands available in the market which suits best according to the needs of person. The home teeth whitening kits is inexpensive treatment and can used from the comfort of your home. By using the home teeth whitening kits you can achieve the same brightness in your teeth with the best teeth whitening system.
The dental teeth whitening process easily solves the problem of receding gums, sensitive and defective restorations of an individual. So it is advisable to take proper dental teeth whitening treatment rather than using teeth whitening products that might injure the tooth enamel of a person.
You can also read online teeth whitening product reviews for choosing the right kind of teeth whitening products according to your suitability. One can also write teeth whitening reviews that will helps that manufacturer to improve the quality of their teeth whitening product. Teeth whitening reviews is must to be given by every user so that decision making process about the product becomes easier for others also who are looking for the best tooth whitening product online.
Teeth whitening product reviews available online make the process of teeth whitening effective and the best teeth whitening system. This Tooth whitening review is basically a kind of experience shared by people regarding the usage of different types of teeth whitening products which includes gel, strips or cleansing swabs. Online tooth whitening review proves beneficial in making a decision at the time of buying products for maintaining proper health hygiene to get white teeth. Go smile teeth deals efficiently in dealing with home teeth whitening products who under the supervision of expert online retailers of teeth whitening products who directly approach to the customer.
Posted in Milwaukee Tool Reviews |
Tags: Online, Products, Quality, Teeth, Whitening |
No Comments »
How to Solve Windows Vista Error ‘Error Occurred…boot Configuration Data’?
Windows Vista Boot Configuration Data or BCD is a firmware independent database required by computer to get configuration information at boot time. It has similar functionality that Boot.ini file performs in earlier versions of Windows. On computers using IBM PC compatible firmware, the file is located on system volume in BootBCD. If the file goes missing or cannot be read by computer, you encounter several boot-time issues. In worst case, the system can become completely unbootable, without allowing you to access the stored data. If you fail to solve such issue by using system repair tools, you might need to reinstall Windows Vista that causes data loss. To restore thus lost data, you need to either use your backup or a third-party data recovery utility that can locate and restore the missing data.
To illustrate such scenarios, consider that you use a Windows Vista based computer. You start the computer and come across the below error message:
File: BootBCD
Status: 0xc000000f
Info: “an error occurred while attempting to read the boot configuration data”
You cannot boot the computer after you receive this error message and your data remains inaccessible.
Cause
The above error might occur due to any of the following possibilities:
-
The BootBCD file is missing or damaged
-
No Bootmgr (Windows Boot Manager that accesses BCD store) is present
Solution
To solve the given problem, you need to follow these methods:
-
Use Windows Vista installation disc to start the computer and choose ‘Repair your computer’. You then need to select ‘Startup Repair’ option of ‘System Recovery Options’ to repair the BCD store.
-
Try using Bootrec /RebuildBcd command through command prompt listed in ‘System Recovery Options’ that runs the Bootrec.exe tool to rebuild the store. Type Yes if the tool can locate missing Windows installation and asks you to mark an entry. If it cannot, you need to execute the below commands to remove and then recreate the BCD store:
Bcdedit /export C:BCD_Backup
ren c:
- Advancements
- Artificial Intelligence
- Biotechnology
- Computer Architecture
- Computer Forensics
- Data Recovery
- Databases
- Gadgets & Gizmos
- Hardware
- Intranet
- IT Trainings
- Laptops
- Malware
- Mobile Computing
- Networks
- Office Automation
- Operating System
- Programming
- Research
- Security
- Software
- Support & Services
- Tech Updates
How to Solve Windows Vista Error ‘Error Occurred…boot Configuration Data’?
Published by: Jacobluis (32) | Word Count: 430 | Comments: 0 | Article Views: 317
Contact Author Email to Friends Print Article Make PDF Bookmark & Share Article Add a Comment Report Article
Windows Vista Boot Configuration Data or BCD is a firmware independent database required by computer to get configuration information at boot time. It has similar functionality that Boot.ini file performs in earlier versions of Windows. On computers using IBM PC compatible firmware, the file is located on system volume in BootBCD. If the file goes missing or cannot be read by computer, you encounter several boot-time issues. In worst case, the system can become completely unbootable, without allowing you to access the stored data. If you fail to solve such issue by using system repair tools, you might need to reinstall Windows Vista that causes data loss. To restore thus lost data, you need to either use your backup or a third-party data recovery utility that can locate and restore the missing data.
To illustrate such scenarios, consider that you use a Windows Vista based computer. You start the computer and come across the below error message:
File: BootBCD
Status: 0xc000000f
Info: “an error occurred while attempting to read the boot configuration data”
You cannot boot the computer after you receive this error message and your data remains inaccessible.
Cause
The above error might occur due to any of the following possibilities:
-
The BootBCD file is missing or damaged
-
No Bootmgr (Windows Boot Manager that accesses BCD store) is present
Solution
To solve the given problem, you need to follow these methods:
-
Use Windows Vista installation disc to start the computer and choose ‘Repair your computer’. You then need to select ‘Startup Repair’ option of ‘System Recovery Options’ to repair the BCD store.
-
Try using Bootrec /RebuildBcd command through command prompt listed in ‘System Recovery Options’ that runs the Bootrec.exe tool to rebuild the store. Type Yes if the tool can locate missing Windows installation and asks you to mark an entry. If it cannot, you need to execute the below commands to remove and then recreate the BCD store:
Bcdedit /export C:BCD_Backup
ren c:
Posted in Dewalt Tool Reveiws |
Tags: Configuration, Data, Error, Occurred...boot, Solve, Vista, Windows |
No Comments »
How to Solve Windows Vista Error ‘Error Occurred…boot Configuration Data’?
Windows Vista Boot Configuration Data or BCD is a firmware independent database required by computer to get configuration information at boot time. It has similar functionality that Boot.ini file performs in earlier versions of Windows. On computers using IBM PC compatible firmware, the file is located on system volume in BootBCD. If the file goes missing or cannot be read by computer, you encounter several boot-time issues. In worst case, the system can become completely unbootable, without allowing you to access the stored data. If you fail to solve such issue by using system repair tools, you might need to reinstall Windows Vista that causes data loss. To restore thus lost data, you need to either use your backup or a third-party data recovery utility that can locate and restore the missing data.
To illustrate such scenarios, consider that you use a Windows Vista based computer. You start the computer and come across the below error message:
File: BootBCD
Status: 0xc000000f
Info: “an error occurred while attempting to read the boot configuration data”
You cannot boot the computer after you receive this error message and your data remains inaccessible.
Cause
The above error might occur due to any of the following possibilities:
-
The BootBCD file is missing or damaged
-
No Bootmgr (Windows Boot Manager that accesses BCD store) is present
Solution
To solve the given problem, you need to follow these methods:
-
Use Windows Vista installation disc to start the computer and choose ‘Repair your computer’. You then need to select ‘Startup Repair’ option of ‘System Recovery Options’ to repair the BCD store.
-
Try using Bootrec /RebuildBcd command through command prompt listed in ‘System Recovery Options’ that runs the Bootrec.exe tool to rebuild the store. Type Yes if the tool can locate missing Windows installation and asks you to mark an entry. If it cannot, you need to execute the below commands to remove and then recreate the BCD store:
Bcdedit /export C:BCD_Backup
ren c:
- Advancements
- Artificial Intelligence
- Biotechnology
- Computer Architecture
- Computer Forensics
- Data Recovery
- Databases
- Gadgets & Gizmos
- Hardware
- Intranet
- IT Trainings
- Laptops
- Malware
- Mobile Computing
- Networks
- Office Automation
- Operating System
- Programming
- Research
- Security
- Software
- Support & Services
- Tech Updates
How to Solve Windows Vista Error ‘Error Occurred…boot Configuration Data’?
Published by: Jacobluis (32) | Word Count: 430 | Comments: 0 | Article Views: 315
Contact Author Email to Friends Print Article Make PDF Bookmark & Share Article Add a Comment Report Article
Windows Vista Boot Configuration Data or BCD is a firmware independent database required by computer to get configuration information at boot time. It has similar functionality that Boot.ini file performs in earlier versions of Windows. On computers using IBM PC compatible firmware, the file is located on system volume in BootBCD. If the file goes missing or cannot be read by computer, you encounter several boot-time issues. In worst case, the system can become completely unbootable, without allowing you to access the stored data. If you fail to solve such issue by using system repair tools, you might need to reinstall Windows Vista that causes data loss. To restore thus lost data, you need to either use your backup or a third-party data recovery utility that can locate and restore the missing data.
To illustrate such scenarios, consider that you use a Windows Vista based computer. You start the computer and come across the below error message:
File: BootBCD
Status: 0xc000000f
Info: “an error occurred while attempting to read the boot configuration data”
You cannot boot the computer after you receive this error message and your data remains inaccessible.
Cause
The above error might occur due to any of the following possibilities:
-
The BootBCD file is missing or damaged
-
No Bootmgr (Windows Boot Manager that accesses BCD store) is present
Solution
To solve the given problem, you need to follow these methods:
-
Use Windows Vista installation disc to start the computer and choose ‘Repair your computer’. You then need to select ‘Startup Repair’ option of ‘System Recovery Options’ to repair the BCD store.
-
Try using Bootrec /RebuildBcd command through command prompt listed in ‘System Recovery Options’ that runs the Bootrec.exe tool to rebuild the store. Type Yes if the tool can locate missing Windows installation and asks you to mark an entry. If it cannot, you need to execute the below commands to remove and then recreate the BCD store:
Bcdedit /export C:BCD_Backup
ren c:
Posted in Dewalt Tool Reveiws |
Tags: Configuration, Data, Error, Occurred...boot, Solve, Vista, Windows |
No Comments »
How to Solve Windows Vista Error ‘Error Occurred…boot Configuration Data’?
Windows Vista Boot Configuration Data or BCD is a firmware independent database required by computer to get configuration information at boot time. It has similar functionality that Boot.ini file performs in earlier versions of Windows. On computers using IBM PC compatible firmware, the file is located on system volume in BootBCD. If the file goes missing or cannot be read by computer, you encounter several boot-time issues. In worst case, the system can become completely unbootable, without allowing you to access the stored data. If you fail to solve such issue by using system repair tools, you might need to reinstall Windows Vista that causes data loss. To restore thus lost data, you need to either use your backup or a third-party data recovery utility that can locate and restore the missing data.
To illustrate such scenarios, consider that you use a Windows Vista based computer. You start the computer and come across the below error message:
File: BootBCD
Status: 0xc000000f
Info: “an error occurred while attempting to read the boot configuration data”
You cannot boot the computer after you receive this error message and your data remains inaccessible.
Cause
The above error might occur due to any of the following possibilities:
-
The BootBCD file is missing or damaged
-
No Bootmgr (Windows Boot Manager that accesses BCD store) is present
Solution
To solve the given problem, you need to follow these methods:
-
Use Windows Vista installation disc to start the computer and choose ‘Repair your computer’. You then need to select ‘Startup Repair’ option of ‘System Recovery Options’ to repair the BCD store.
-
Try using Bootrec /RebuildBcd command through command prompt listed in ‘System Recovery Options’ that runs the Bootrec.exe tool to rebuild the store. Type Yes if the tool can locate missing Windows installation and asks you to mark an entry. If it cannot, you need to execute the below commands to remove and then recreate the BCD store:
Bcdedit /export C:BCD_Backup
ren c:
- Advancements
- Artificial Intelligence
- Biotechnology
- Computer Architecture
- Computer Forensics
- Data Recovery
- Databases
- Gadgets & Gizmos
- Hardware
- Intranet
- IT Trainings
- Laptops
- Malware
- Mobile Computing
- Networks
- Office Automation
- Operating System
- Programming
- Research
- Security
- Software
- Support & Services
- Tech Updates
How to Solve Windows Vista Error ‘Error Occurred…boot Configuration Data’?
Published by: Jacobluis (32) | Word Count: 430 | Comments: 0 | Article Views: 313
Contact Author Email to Friends Print Article Make PDF Bookmark & Share Article Add a Comment Report Article
Windows Vista Boot Configuration Data or BCD is a firmware independent database required by computer to get configuration information at boot time. It has similar functionality that Boot.ini file performs in earlier versions of Windows. On computers using IBM PC compatible firmware, the file is located on system volume in BootBCD. If the file goes missing or cannot be read by computer, you encounter several boot-time issues. In worst case, the system can become completely unbootable, without allowing you to access the stored data. If you fail to solve such issue by using system repair tools, you might need to reinstall Windows Vista that causes data loss. To restore thus lost data, you need to either use your backup or a third-party data recovery utility that can locate and restore the missing data.
To illustrate such scenarios, consider that you use a Windows Vista based computer. You start the computer and come across the below error message:
File: BootBCD
Status: 0xc000000f
Info: “an error occurred while attempting to read the boot configuration data”
You cannot boot the computer after you receive this error message and your data remains inaccessible.
Cause
The above error might occur due to any of the following possibilities:
-
The BootBCD file is missing or damaged
-
No Bootmgr (Windows Boot Manager that accesses BCD store) is present
Solution
To solve the given problem, you need to follow these methods:
-
Use Windows Vista installation disc to start the computer and choose ‘Repair your computer’. You then need to select ‘Startup Repair’ option of ‘System Recovery Options’ to repair the BCD store.
-
Try using Bootrec /RebuildBcd command through command prompt listed in ‘System Recovery Options’ that runs the Bootrec.exe tool to rebuild the store. Type Yes if the tool can locate missing Windows installation and asks you to mark an entry. If it cannot, you need to execute the below commands to remove and then recreate the BCD store:
Bcdedit /export C:BCD_Backup
ren c:
Posted in Dewalt Tool Reveiws |
Tags: Configuration, Data, Error, Occurred...boot, Solve, Vista, Windows |
No Comments »
How to Solve Windows Vista Error ‘Error Occurred…boot Configuration Data’?
Windows Vista Boot Configuration Data or BCD is a firmware independent database required by computer to get configuration information at boot time. It has similar functionality that Boot.ini file performs in earlier versions of Windows. On computers using IBM PC compatible firmware, the file is located on system volume in BootBCD. If the file goes missing or cannot be read by computer, you encounter several boot-time issues. In worst case, the system can become completely unbootable, without allowing you to access the stored data. If you fail to solve such issue by using system repair tools, you might need to reinstall Windows Vista that causes data loss. To restore thus lost data, you need to either use your backup or a third-party data recovery utility that can locate and restore the missing data.
To illustrate such scenarios, consider that you use a Windows Vista based computer. You start the computer and come across the below error message:
File: BootBCD
Status: 0xc000000f
Info: “an error occurred while attempting to read the boot configuration data”
You cannot boot the computer after you receive this error message and your data remains inaccessible.
Cause
The above error might occur due to any of the following possibilities:
-
The BootBCD file is missing or damaged
-
No Bootmgr (Windows Boot Manager that accesses BCD store) is present
Solution
To solve the given problem, you need to follow these methods:
-
Use Windows Vista installation disc to start the computer and choose ‘Repair your computer’. You then need to select ‘Startup Repair’ option of ‘System Recovery Options’ to repair the BCD store.
-
Try using Bootrec /RebuildBcd command through command prompt listed in ‘System Recovery Options’ that runs the Bootrec.exe tool to rebuild the store. Type Yes if the tool can locate missing Windows installation and asks you to mark an entry. If it cannot, you need to execute the below commands to remove and then recreate the BCD store:
Bcdedit /export C:BCD_Backup
ren c:
- Advancements
- Artificial Intelligence
- Biotechnology
- Computer Architecture
- Computer Forensics
- Data Recovery
- Databases
- Gadgets & Gizmos
- Hardware
- Intranet
- IT Trainings
- Laptops
- Malware
- Mobile Computing
- Networks
- Office Automation
- Operating System
- Programming
- Research
- Security
- Software
- Support & Services
- Tech Updates
How to Solve Windows Vista Error ‘Error Occurred…boot Configuration Data’?
Published by: Jacobluis (32) | Word Count: 430 | Comments: 0 | Article Views: 311
Contact Author Email to Friends Print Article Make PDF Bookmark & Share Article Add a Comment Report Article
Windows Vista Boot Configuration Data or BCD is a firmware independent database required by computer to get configuration information at boot time. It has similar functionality that Boot.ini file performs in earlier versions of Windows. On computers using IBM PC compatible firmware, the file is located on system volume in BootBCD. If the file goes missing or cannot be read by computer, you encounter several boot-time issues. In worst case, the system can become completely unbootable, without allowing you to access the stored data. If you fail to solve such issue by using system repair tools, you might need to reinstall Windows Vista that causes data loss. To restore thus lost data, you need to either use your backup or a third-party data recovery utility that can locate and restore the missing data.
To illustrate such scenarios, consider that you use a Windows Vista based computer. You start the computer and come across the below error message:
File: BootBCD
Status: 0xc000000f
Info: “an error occurred while attempting to read the boot configuration data”
You cannot boot the computer after you receive this error message and your data remains inaccessible.
Cause
The above error might occur due to any of the following possibilities:
-
The BootBCD file is missing or damaged
-
No Bootmgr (Windows Boot Manager that accesses BCD store) is present
Solution
To solve the given problem, you need to follow these methods:
-
Use Windows Vista installation disc to start the computer and choose ‘Repair your computer’. You then need to select ‘Startup Repair’ option of ‘System Recovery Options’ to repair the BCD store.
-
Try using Bootrec /RebuildBcd command through command prompt listed in ‘System Recovery Options’ that runs the Bootrec.exe tool to rebuild the store. Type Yes if the tool can locate missing Windows installation and asks you to mark an entry. If it cannot, you need to execute the below commands to remove and then recreate the BCD store:
Bcdedit /export C:BCD_Backup
ren c:
Posted in Dewalt Tool Reveiws |
Tags: Configuration, Data, Error, Occurred...boot, Solve, Vista, Windows |
No Comments »
6 More Resume Writing Tips That Pay
I have seen many hundreds of Professional resumes during my career in human resources. Very nice, competent, and well intending people sometimes sent resumes in which they made one or more “little” mistakes. Whether it was a misspelled word, the wrong prefix on a word, or fragmented sentence, how many resume mistakes does it take to prevent getting a job? Many hiring managers have a zero tolerance when it comes to such mistakes on a resume. Following are more resume writing tips inspired from things seen on people’s resumes.
Tip 1: Resume cover letters must communicate. Review your letter to be sure it does the following:
* Makes the case that you are the solution to the employer’s problems.
* Gets to the primary subject quickly.
* Solidly connects employer’s job requirements with your background and experience.
* Is written such that all sentences and paragraphs are short and easy to read.
* Makes a solid connection with the needs of the prospective employer.
* Has repeated use of the word “you” (i.e., remember that the theme of your resume is what you can do for them, not the other way around).
* Minimizes number of fonts used. One is preferable to me, with sparing use of italics and “bold.”
* Uses a clear and easy to read font that is no smaller than a size “10″ or “11.”
* Makes a simple but clear case that you would like to work for them.
* Expresses a reason why they should contact you.
* Factors in a reason to act sooner rather than later.
* Starts the letter by stating your conclusion upfront.
* Supports your position by presenting a quantifiable objective(s) and briefly mentions why is/are relevant.
* Restate major conclusion in a sentence or two at end of letter.
* Makes it easy to reach you: provides multiple ways that you can be contacted (i.e., home telephone, email, street address, and/or cell number at minimum).
Tip 2: If in doubt, keep it simple. Use an English word equivalent rather than French or Latin terms, and single-syllable words rather than multi-syllable terms. Examples include: “per day” instead of “per diem,” “per year” instead of “per annum,” “essential” instead of “sine qua non,” “genuine” instead of “bona fide.” An exception is if such terms are common in your industry.
Tip 3: Use specific, measurable terms versus those that are unclear. Examples: “we received numerous inquiries,” versus “we received 170 inquiries.”
Tip 4: Eliminate use of repetitive and unnecessary words. Example #1: “assisted in the preparation of…,” versus: “assisted in preparing.” Example #2: “responsible for the directing of…,” versus “directed.”
Tip 5: Use first-person and second-person words (e.g., “I”, “we,” “my,” “our,” “you,” “your,” “yours,” etc.), as appropriate, to personalize your resume and cover letter.
Tip 6: Sometimes it is possible to be too familiar with a document to see it objectively. Consider having someone else review your resume for you, such as a close friend, family member or a resume service.
